If you are wondering how difficult to install LED replacements for your garage, barn or house could be, do not worry! The process is even easier than installing the former lighting fixture you had before, especially if you choose the correct LED replacement of course. We have here many good examples using Hyperlite LED Lights. The easiest and best examples are Hero Series and Saturn Series High Bay Lights, these bay and high bay lights come standard with a US hook, which can be easily hung using an eye bolt (or eye lag screw) directly attached to the ceiling truss or rafter, and the best part is these high bay lights come with a US standard 110V plug, so you would only need to have a receptacle near (the fixtures come with a 5ft cord), additionally you have the safety wire which should always be used around a truss, rafter or using a security eye bolt in order to avoid any fall accidents. And Hero Series and Saturn Series High Bay Lights come with their dimming function, to use it you would only need to connect the two dimming wires coming from the top of the fixtures with a compatible low voltage 1-10V or 0-10V LED Dimmer. Hyperlite offers its own dimmer switch you can see it going to hi-hyperlite.com and surfing to the Accessories menu, it is the first option “LED Dimmer”. An additional plus would be to use the Acrylic LED Reflectors, exclusively designed for Hero Series (Hero Series Only), to use this accessory you would only need to screw it with the provided four small screws to the bottom of the Hero Series High Bay Lights, these acrylic reflectors come in two colors milky (frosted) and clear (translucent).
The next easiest example is Radar Series, this style UFO LED High Bay Light does not come with a 110V plug but ready for hard-wiring. The advantage of these fixtures is that it can be equipped with its accessory motion sensor (Motion Sensor – Radar Series) and through it the fixture can be dimmed down and/or set up for many occupancy sensing features, using the separately sold Remote Controller - Radar Series. Radar Series also comes with a standard US Hook and safety wire.

Other easy LED upgrade is achieved by using LED Vapor Tight Light - Capsule series with its three step installation, this linear LED is similar in shape to the common traditional fluorescent tubes but with all the advantages of LED, increased energy efficiency, 130 Lumens per Watt, lower maintenance costs and longer lifespan. These 5000K LED Vapor Tight Light comes with a 2ft wire, it is designed to be easily daisy-chained in order to extend the luminaire coverage, if you  use the 60w version you can put together groups of 10pcs, with the 40w version you can have groups of 15 pcs easily daisy-chained. LED Vapor Tight Light - Capsule series as well as Hero Series, Saturn Series and Radar Series are IP 65 grade dust and moist proof so it can be widely used in many different types of applications, these can even be used outdoors. Each fixture comes with two surface mounting brackets which have to be correctly aligned and screwed directly to the ceiling, after performing that you only need to snap the light into place onto the already placed mounting brackets, finally do the hardwiring and daisy-chaining.